HomeFuel System PartsFuel Injectors, Bosch Fuel injectorsTop Feed 14mm O Ring
injector 1/2 height 1370cc @ 4Bar / 1140cc @ 3Bar
In Stock
Product Code: 851-1370E
$121.00
inc GST for Australian CustomersAUD $110.00 (ex GST)
for International Customers
inc GST for Australian CustomersAUD $110.00 (ex GST)
for International Customers
57.09
GBP68.66
EUR122.60
NZD11,071.16
JPY71.53
USD
GBP68.66
EUR122.60
NZD11,071.16
JPY71.53
USD
approximate only
EV14 Half Height Extended Nose Injector with optional Injector Height Adapters with either 11mm or 14mm top orings to suit your fuel rail.
THIS INJECTOR IS E85 COMPATIBLE.
184 HP Normally Aspirated (0.5 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) - estimated (pump petrol)
153 HP Turbo (0.6 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Pressure) up to 1 Bar Boost - estimated (pump petrol)
142 HP Turbo (0.65 B.S.F.C & 85% Duty Cycle 3.0 Bar Fuel Presure) up to 2 Bar Boost - estimated (pump petrol)
> Flow Rate - 1140cc/min (120Lb/Hr) @ 3.0Bar 1370cc (143 Lb/Hr) @4 Bar
> ORings - 14mm Top / 14mm Bottom
> Electrical Plug - Bosch (Oval)
> Impedance - 12.0 Ohms (High)
> Spray Pattern - Split Cone
> Oring Top to Bottom / Center to Center without Height Adapter - 38.0mm
> Oring Top to Bottom / Center to Center with 11mm Top Oring Height Adapter - 64.5mm
> Oring Top to Bottom / Center to Center with 14mm Top Oring Height Adapter - 64.5mm
> Manufacture - Bosch
Details
INJECTOR HEIGHT ADAPTERS:
| PART NUMBER | DESCRIPTION | IMAGE |
| 851-14LESP | Injector Adapter Combo for 1/2 Height Extended Nose Injector with 14mm Top Adapter |  |
| 851-11LESP | Injector Adapter Combo for 1/2 Height Extended Nose Injector with 11mm Top Adapter |  |
| 851-14LE | Adapter Lower for Extended Nose Injector |  |
INJECTOR CONNECTORS TO SUIT:
Replacement injectors are only as good as the wiring, pins and plugs that supply current
and voltage to them.
This is an ideal time to check your injector plugs and pins for signs of pin corrosion, pins
splayed open and crumbling plastic connectors.
If in doubt, it can be cheap insurance to replace your injector connectors with brand new items to ensure positive electrical connections.
| PART NUMBER | DESCRIPTION | IMAGE |
| H-INJP | injector plug, pins and seals - No boot |  |
| H-INJPB2 | injector plug with high quality boot |  |
| 852-LOOM2 | Bosch Injector To USCAR Loom Adapter |  |
| 852-LOOM4 | Bosch Injector To Nissan Loom Adapter |  |
| 852-LOOM6 | Bosch Injector To USCAR Loom Adapter - Hard |  |
| 852-LOOM8 | Bosch Injector To Denso Loom Adapter |  |
