HomeElectrical Connectors and PlugsECU, Display, PDM connectors & Accessories
26 Way AMP Super Seal Kit "3" Keying
In Stock
Product Code: C26F-0003
$44.00
inc GST for Australian CustomersAUD $40.00 (ex GST)
for International Customers
inc GST for Australian CustomersAUD $40.00 (ex GST)
for International Customers
20.76
GBP24.97
EUR44.60
NZD4,026.62
JPY26.02
USD
GBP24.97
EUR44.60
NZD4,026.62
JPY26.02
USD
approximate only
26 Pin Superseal connector with "3" Keying, Suits MoTec M150, Haltech Nexus Link Thunder and more.
Includes housing and terminals
Details
ASSOCIATED COMPONENTS:
| PART NUMBER | DESCRIPTION | IMAGE |
| C-ECU-60-BS-90 | Backshell and moulded boot kit |  |
| C-ECU-34-BS | Billet Backshell |  |
| C-ECU-34-90B | 90 Degree Heat Shrink Boot |  |
TOOLS:
| PART NUMBER | DESCRIPTION | IMAGE |
| D-HT-F0220 | universal crimp tool |  |
PIN REMOVAL:
The great thing about this connector, is that you don't need a pin removal tool to remove the pins.
On the underside of the connector is a single white plastic line.
Push that single white plastic piece in, and it will unlock the pins. You will also see two smaller tabs sticking up on the top side of the connector. This indicates that the connector pins are unlocked.
The two smaller tabs also stop you from plugging in the connector when you disabled the pin lock.
Now you can pull out, or insert pins as you need.
To lock the pins in place, you simply push in the two small white tabs on the top side of the connector down.
You can now plug the connector back in.
PIN REMOVAL:
The great thing about this connector, is that you don't need a pin removal tool to remove the pins.
On the underside of the connector is a single white plastic line.
Push that single white plastic piece in, and it will unlock the pins. You will also see two smaller tabs sticking up on the top side of the connector. This indicates that the connector pins are unlocked.
The two smaller tabs also stop you from plugging in the connector when you disabled the pin lock.
Now you can pull out, or insert pins as you need.
To lock the pins in place, you simply push in the two small white tabs on the top side of the connector down.
You can now plug the connector back in.
We have previously changed out part number system, the previous part number was C-ECU-26-3
